Case hardening (carburizing) produced globular and semi continuous carbides an undesirable brittle phase in the case microstructure
Automotive Industry Testing
ATRONA Material Testing Labs has been involved with
automotive testing for close to a decade. We have
assisted customers with all types of static and dynamic
testing related to seats, recliners, doors, and trunks;
either individual tests or full engineering specification
testing with full formal reports presented per standards.
The following is a list of some of the tests that we have
performed here at the lab. We also performed custom
testing designed by ATRONA and approved by the
customer.
Tensile Testing (Ultimate TS, Yield, Elongation, Reduction in Area)
Torque Testing
Effort Testing
Engage and Release
Chuck and Deflection
Abuse
Environmental Testing
Life Cycle Testing
Mechanical testing at high and low temperature
FMVSS Testing
Static Testing
Durability Testing
Fastener Testing
Consumer Product Testing
"Hooks" - Deflection and Static Testing
Impact Testing
Vibration Testing
Spin to Burst Testing
Cleanliness Testing
Special Custom Testing
CMM Measurements
Life cycle/fatigue at low and high temperatures
Proof Load Testing
Wear Testing
Recliner / Seating Testing
ACLASS Big Three Recognition
Chrysler
GM
ATRONA Material Testing Labs has been involved withautomotive testing for close to a decade. We have
assisted customers with all types of static and dynamic
testing related to seats, recliners, doors, and trunks;
either individual tests or full engineering specification
testing with full formal reports presented per standards.
The following is a list of some of the tests that we have
performed here at the lab. We also performed custom
testing designed by ATRONA and approved by the
customer.
Tensile Testing (Ultimate TS, Yield, Elongation, Reduction in Area)
Torque Testing
Effort Testing
Engage and Release
Chuck and Deflection
Abuse
Environmental Testing
- High Tempurature
- Low Tempurature
- Humidity
- Salt Spray
- Dust Testing
Life Cycle Testing
Mechanical testing at high and low temperature
FMVSS Testing
Static Testing
Durability Testing
Fastener Testing
Consumer Product Testing
"Hooks" - Deflection and Static Testing
Impact Testing
Vibration Testing
Spin to Burst Testing
Cleanliness Testing
Special Custom Testing
CMM Measurements
Life cycle/fatigue at low and high temperatures
Proof Load Testing
Wear Testing
Recliner / Seating Testing
ACLASS Big Three Recognition
Chrysler GM